Das Stativ
Home
Products for lab and pilot plant
News
Dissolver
Explosion proof Dissolver
Vacuum Dissolver
Dissolver for high viscosity products
Bead mills
Bead mill APS
Bead mill DISPERMAT SL-B
Bead mill DISPERMAT SL
Bead mill DISPERMAT SL-NANO
Basket mills
Mixers and Stirrers
Homogenizers
Coil-Coatings
Products for production
Accessories
Dispersing & grinding know-how
Company
Handouts
CERTIFIED QUALITY MANAGEMENT SYSTEM --- TÜV-CERT --- VMA-GETZMANN GMBH

DISPERMAT® SL-B bead mill

Compact horizontal laboratory bead mill. Option: explosion proof according to ATEX

DISPERMAT®
type
Power
kW
Speed
rpm
Milling chamber
litre
Product volume
litre
Bead mill DISPERMAT® SL-B12 1.1 0 ‒ 6000 0.125 0.15 ‒ 0.75

Fine grinding batch sizes from 150 to 750 ml with the compact DISPERMAT SL-B bead mill

The new DISPERMAT® SL-B horizontal bead mill is based on the proven SL bead mill technology. It is designed with an integrated millbase circulation system which means there are no external pumps to clean. The speed is infinitely adjustable via a controller located in a separate stainless steel housing. There is a clear digital display showing speed, torque and timer functions; the product temperature is shown on the temperature gauge located on the milling chamber. Milling beads 0.8 mm and larger. The is pumped through the horizontal milling chamber by a specially designed screw pump which is connected to the milling rotor. The DISPERMAT® SL-B can be used for both the single pass milling method and for the circulation milling method. With either method, an extremely high product yield is achieved due to any mill base remaining inside the milling chamber at the end of the process being pressed out by an integrated press out device. That is why the DISPERMAT® SL-B bead mill is ideally suited to research, development and quality management requirements. An explosion proof ATEX approved version is also available.

The bead mill DISPERMAT® SL-B is supplied with VITON (FKM – rubber) O-rings as standard. Alternatively EPDM (ethylene propylene) O-rings can be fitted at no extra charge. If VITON or EPDM is not compatible with the products being milled, O-rings made from one of the following perfluoroelastomeres are recommended: KALREZ®, CHEMRAZ®, PERLAST®. A detailed resistance list can be found in our range of accessories. Forward to the resistance list »

The bead mill uses the DISPERMAT LC technology

The DISPERMAT® bead mill is fitted with the LC - technology

The DISPERMAT® bead mill is fitted with the LC - technology

  • Adaptive turn sensitive speed adjustment
  • Digital speed indication
  • Timer function with digital display of the pre–selected time as well as the elapsed timestufenlose Drehzahlverstellung

Fine grinding with the compact SL-B bead mill

  • Easy and fast development of products
  • Milling chamber made of wear resistant, high-alloy stainless steel, milling rotor made of hardened nitrided steel
  • Millbase separation with dynamic gap
  • Shaft sealing with mechanical seal
  • Barrier pressure system with integrated cooling
  • Low dead volume
  • Extremely high product yield allows the dispersion of even the smallest quantities
  • optimum temperature control due to guided cooling water system and large heat exchange surfaces
  • Connection for cooling water with two convenient quick lock self sealing couplings
  • Suitable for all commonly used milling beads, glass, zirconium oxide etc. from 0.8 mm diameter
  • user friendly and safe handling
  • Easy cleaning enables quick product changes
  • Choice of single pass milling and multi pass milling -
  • Dispersion of flowing and non-flowing products
  • High mechanical power input enables processing of difficult to disperse products
For the conveyance of non flowable and high viscous substances through the bead mill the feeding press FP is used. Forward to the feeding press FP »


KHIMIA 2017
KHIMIA 2017

RUSSIA
23. - 26.10.2017
KHIMIA, Moscow


Hall: Pavillion 2,
Booth: 22C38

Contact person
Dipl.-Ing. Adam Snietka
We would be pleased to show you the impressive work section of our stirring, dispersing and fine grinding systems DISPERMAT® and TORUSMILL® for stirring, homogenising, dispersing and fine grinding up to the nanoscale. Please visit us in our excellently equipped laboratory and pilot plant for a personal product demonstration with your own products

Our skilled engineers are available at any time for personal advice.

Call-through   +49 2296 - 80355
Email   Dipl.-Ing. Adam Snietka
Exhibitions 2017
SPAIN
02. - 06.10.2017
EXPOQUIMIA, Barcelona
BRAZIL
03. - 05.10.2017
ABRAFATI, Sao Paulo
RUSSIA
23. - 26.10.2017
KHIMIA, Moscow
CHINA
15. - 17.11.2017
CHINACOAT, Shanghai
Innovation made in Germany
Flexible. Powerful. Innovative.

With the adaptable dispersing and fine grinding systems the DISPERMAT® dissolvers can be used as a vacuum dissolver, bead mill, basket mill, homogeniser and dissolver for high viscous products.

Find the modular diversity!
Contact information
VMA-GETZMANN GMBH
Verfahrenstechnik
Euelerhammerstraße 13
D-51580 Reichshof
Germany
Phone: +49 2296 8030
Fax: +49 2296 80333
Email: info@vma-getzmann.de
Local time in Germany:
17.10.2017  07:56

Product overview

Contact

Laboratory and Pilot Plant

Production

You have questions? We are looking forward to your call

Dissolver

Explosion proof dissolver

Vacuum dissolver

Dissolver for high viscosity products

Bead mills

Basket mills

Mixers and stirrers

Homogenizers

Coil Coatings

Dissolver

Bead mills

Basket mills

+49 2296 - 8030

... or please just send us a message. Our skilled engineers will get in contact with you by return.