Das Stativ
Home
Dispersion & milling systems
for 50 ml - 5 litres
for 500 ml - 20 litres
Dissolvers
Vacuum dissolvers
Vacuum system CDS
Vacuum dissolver LH
Vacuum dissolver VE3-10
Vacuum dissolver VL
Vacuum dissolver VE
Bead mills & basket mills
Homogenizer
Stirrer
Reactor systems
for 20 - 1800 litres
Comparison of controls
Dispersion accessories
Dispersion know-how
Company
Handouts
CERTIFIED QUALITY MANAGEMENT SYSTEM --- TÜV-CERT --- VMA-GETZMANN GMBH

Modular vacuum system CDS for dispersing under vacuum from 200 ml - 17 litres

Optional: Single or double walled container holder

Vacuum
system
Product
volume
Container
size
Recommended
DISPERMAT®
A single or double walled container receptacle with glass cover is available
CDS 250 200 ml 250 ml CL54  |  LC30  |  LC55 - LC75  |  CV3  |  CA  |  FM  |  CN  |  AE1 - AE6
CDS 500 400 ml 500 ml CL54  |  LC30  |  LC55 - LC75  |  CV3  |  CA  |  FM  |  CN  |  AE - AE6
CDS 1000 700 ml 1 litres CL54  |  LC30  |  LC55 - LC75  |  CV3  |  CA  |  FM  |  CN  |  AE - AE6
CDS 2000 1,5 litres 2 litres LC75  |  CV3  |  CA40 - CA60  |  FM  |  CN  |  AE2 - AE6
CDS 3000 2,2 litres 3 litres CA40 - CA60  |  FM  |  CN  |  AE2 - AE6
CDS 5000 3,5 litres 5 litres CA60  |  FM  |  CN  |  AE6 - AE12
A single or double walled container with an aluminium cover is available (without container receptacle)
CDS 10000 7 litres 10 litres FM40  |  CN40  |  AE6 - AE12
CDS 20000 15 litres 20 litres FM40  |  CN40  |  AE6 - AE12
CDS 25000 17 litres 25 litres FM40  |  CN40  |  AE6 - AE12
 = vacuum systems for laboratory  = vacuum systems for laboratory and pilot plant
Product volumes are based on medium viscosity. The values can be exceeded or deceeded.



Dispersing and fine grinding under vacuum

The CDS dispersion system enables the dispersion process to be carried out in single walled containers in a closed system under vacuum. The single walled containers are placed into the container receptacle and secured in place. If the dispersion process needs to be cooled a double walled container receptacle is available. After the liquid and powder components have been added, the glass cover can be lowered onto the container receptacle over the vacuum shaft guide tube. The actual dispersion process can now be run and the product is set into a turbulence free rolling motion. If vacuum is required the vacuum pump can be switched on. The impeller height can be easily be raised or lowered during the dispersion process even under vacuum. The dispersion process can be observed clearly through the large glass cover. All CDS systems are available single or double walled (temperature controlled).



Flexible. Powerful. Innovative.

The following picture shows the dispersion process with the vacuum system CDS 500 with double walled container receptacle:

The picture shows the double walled version of the container receptacle made of stainless steel (temperature controlled) of the modular vacuum system CDS. The single walled container is fixed in the double walled container receptacle and the powdery component is stirred into the liquid component. After mixing the liquid and the powdery component the glass cover is placed upon and the dispersion process starts under vacuum. With the correct operation the grinding stock is put into a rolling, turbulence free movement (Doughnut-effect). The results achieved with the laboratory dissolver DISPERMAT® can be excellently transferred to working conditions.



The modular vacuum system CDS can be combined with the container clamping device KB. Suitable vacuum pumps for the modular dispersion technology CDS can be found in our extensive range of accessories. Forward to vacuum pumps »


VMA - Toolbox
Add to notepad/PDF-catalogueAdd to notepad/PDF-catalogue
Save item as PDFSave item as PDF
Print itemPrint item
Send item by emailSend item by email
Request for offerRequest for offer
Contact person
Dipl.-Ing. Adam Snietka
We are pleased to show you the impressive business activities of our dispersing and milling systems DISPERMAT® and TORUSMILL®. Please visit us in our extensive fitted laboratory and pilot plant for testing your own product without any obligation.

Our experienced engineers are prepared to support you at any time.

Call-through   +49 2296 - 80355
Email   Dipl.-Ing. Adam Snietka
Innovation made in Germany
Convert the DISPERMAT® dissolver into a vacuum dissolver, a homogenizer, a closed vertical bead mill, a closed vertical basket mill and a dissolver for very high viscosity and non-flowing substances.
Exhibitions 2012
USA
08. - 10.05.2012
American Coatings Show, Indianapolis
Uzbekistan
15. - 17.05.2012
ChemiePlast Uzbekistan 2012, Tashkent
UK
29. - 30.05.2012
SURFEX Plus, Birmingham
Germany
18. - 22.06.2012
ACHEMA, Frankfurt on the Main
Indonesia
11. - 13.07.2012
INACOAT-INACHEM-INAPHARM, Jakarta
Contact information
VMA-GETZMANN GMBH
Verfahrenstechnik
Euelerhammerstraße 13
D-51580 Reichshof
Germany
Phone: +49 2296 8030
Fax: +49 2296 80333
Email: info@vma-getzmann.de
Local time in Germany:
19.05.2012  11:37
 
Powered by noscon.it©modico CMS