Dissolver DISPERMAT® CD-C for high viscosity substances

Dispersion of non-flowing products from 0,5 – 8 litres

= Laboratory dissolver	= Laboratory and pilot plant dissolver
Product volumes are based on medium viscosity. The actual volume may differ depending on the flow behaviour of the product. All instruments can be supplied with different working voltages.

Innovative technology allows repeatable mixing and dispersing results

The dispersion process with a laboratory dissolver is possible only if the product exhibits reasonable flow, making it possible to achieve the Doughnut effect for optimum dispersion results. The required flow pattern is not always possible with high viscosity or non-flowing substances. Extremely high viscosity may cause the product to stand still in the dispersion zone while the dispersion impeller is running in air. The DISPERMAT® CD-C has been developed to be able to disperse these problematical high viscosity or non-flowing products.

The DISPERMAT® CD-C achieves excellent dispersion results by means of the intelligent combination of 5 independent motion parameters: Infinitely variable speed The dispersion container is mounted on a turn-table which rotates, at constant speed, in the opposite direction to the dispersion The dispersion impeller oscillates vertically between two selected positions. The dispersion container can be positioned off centre during the dispersion process. This positions the dissolver shaft centrally or eccentrically. A spring loaded scraper system moves product away from the container wall, ensuring a complete dispersion with no ”dead areas”.

Dissolver with data base and data interface for R & D and quality control

DISPERMAT® C-control Software WINDISP-Pro Comparison of controls

Indications in the display

• Speed of the dissolver shaft, timer, torque, product temperature and power input
• Peripheral speed of the dispersion tool
• Current height of the dispersion tool

Dispersing with WINDISP-Pro

• Bidirectional data interface for WINDISP-Pro. Available in Full version and Basic version
• Full documentation for quality control, research and development
• Remote control of DISPERMAT®
• extensive upload- and download options

The data base functions of the C-control:

• Recording of all parameters
• Up to ten preset database parameter sets can be created, edited and saved
• Definition of cut out values for product temperature, power input, speed and torque possible
• Graphical figure of the measurable values on the display

Dissolver with electrical height adjustment

The DISPERMAT® is fitted with the electronic stand H2E. For detailed information about the innovative height adjustment move the mouse to the red points Ha, H1 and H2 in the picture.

Stand height 1500 mm Stand depth 580 mm Stand width 700 mm Container diameter 100 - 240 mm Container height max. 240 mm Height adjustment electrical

Accessories for the dissolver DISPERMAT® CD-C

In order to remove the heat that is generated during the dispersion process DISPERMAT® CD-C is available with a double walled container receptacle. The cooling liquid is circulated via a rotary connection.

Rotary connection for coolant		Double-walled container receptacle is screwed in place		Stainless steel single-walled container located in the double-walled container receptacle		Container with dissolver shaft and scraper system